McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Pursue Your Passion
Adams Arms

ADAMS ARMS/ Voodoo VDI Slide Assembly - Enforcer - Std - Delta

ADAMS ARMS/ Voodoo VDI Slide Assembly - Enforcer - Std - Delta
Only 4 left

Availability: In stock




The VooDoo Innovations Glock 9mm Slide Assembly is designed as an improved drop-in fit for the Glock.  The VDI Slide is profiled and lightened to reduce recipricol mass and decrease felt recoil. Our VDI Slides are cut from stainless steel with enhanced front and rear cocking serrations for improved manipulation and improved slide geometry to draw your eye to the front sight. The VDI Barrel is machined to tighter fitment tolerances to increase accuracy potential without the need of gunsmith fitting. The barrel features a SAAMI spec 9mm Match chambering, Match Grade Rifling to allow the use of any 9mm projectile (not just jacketed bullets), threaded ½ x 28 TPI  for use with 9mm suppressors and compensators, machined from 416R stainless steel, and Finished in Voodoo Innovations LifeCoat process. Includes VDI Thread Protector. The Enforcer Model includes Micro Red Dot Relief Cut with Cover Plate and upgraded XS Sights Dot Sights.


Complete Replacement (9x19MM) Slide Assembly

  • Profiled and Lightened Slide to Reduce Reciprocal Mass and Decrease Felt Recoil 
  • Enhanced Front and Rear Cocking Serrations for Improved Manipulation 
  • Improved Slide Geometry to Draw Your Eye to the Front Sight
  • Threaded Barrel for Suppressor or Compensator Use 
  • Billet Extractor
  • Includes XS Dot Suppressor-Height Sights
  • Micro Red Dot Relief Cut with Cover Plate
  • 3 recoil springs so you may tailor the gun to your shooting. 
    1. Green - Standard spring
    2. Yellow - 5% lighter spring for subsonic ammunition
    3. Red - 5% Stronger spring for +P ammunition

9mm Match Grade Barrel

  • SAAMI Spec 9mm Match Chambering
  • Tighter Tolerances for Accuracy
  • Match Grade Rifling
    • Allows for use of any 9mm projectile, not just jacketed bullets
  • Threaded with Protector
    • ½ x 28 TPI for Compensators and Suppressors

LifeCoat Finish

  • Melonite & PVD

Made in the USA

  • Life-Time Warranty

Micro Red Dot Relief Cut Options:

  • Leupold Deltapoint Pro



  • 416R Stainless Steel
  • 1:16 Twist
  • Chambered 9x19mm
  • Compatible with All Gen Glock Frames (Gen 4 requires use of adapter)
  • G17 Options Compatible with the following frames: 17, 17C, 17L, 22, 22C, 24, 24C, 31, 34, 35, and 37

Additional Info

Additional Info

SKU FGAV-41007
Manufacturer Adams Arms
Finish No
Barrel Length No
Caliber 9mm
Configuration No
Option No
Gas Length No
Height No
Rail Length No
Mount No
Profile No
Reticle No
Co Witness No
Size No


Customer Reviews (2)

No commentReview by
It's a great looking slide and an apparent value, but I had significant reliability problems. Initially, the striker would not release due to rough finish on the sear face of the firing pin/striker. My local gunsmith smoothed it out, and that resolved that particular problem, so that pulling the trigger would finally release the striker. However, I had continuous failures to eject and feed, including stovepipes, as well as it would not go into battery at all. I had to push the slide each time. So I cleaned it thoroughly and greased it well, assuming it just needs a break in period. I put 400 rounds through it in hopes it would break in. However, it still ejected weakly, placing 50% of the brass on my firing forearm and the other 50% landing on the slide or not ejecting at all, and it still needed to be pushed into battery about 50% of the time. I swapped springs, used a factory spring from the factory guns and used two different factory frames that have proven reliable, but I continued to have problems. The frames work flawlessly with the factory slides/barrels. I'm afraid I simply didn't have any confidence in this slide/barrel combo, so I returned it for a refund.

That being said, Rainier Arms' Customer Service was excellent and responsive. They accepted the return and provided a refund. I appreciate their business ethic.
(Posted on 12/18/2016)
No commentReview by
I like it with the exception that I just mounted my Delta Point yesterday and the sights do not co witness properly. Have I done something wrong with the installation? What can be done to correct this? (Posted on 11/2/2016)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)

Contact Us