Known for their innovative work transforming striker-fired trigger systems, Apex’s patent pending trigger kit design for the M2.0 reduces overall trigger travel by 40% while delivering a crisp trigger break reminiscent of that in a single action 1911 pistol.

The new Flat-Faced Forward Set Trigger Kit is designed specifically for use in the M&P M2.0 and will work in all current models in 9mm, .40S&W and .45ACP calibers, including the recently released M2.0 Compact.

The kit includes an aluminum hard-coat anodized Apex Flat-Faced Forward Set Trigger with a center mounted pivoting safety, an Apex Ultimate Striker Block Kit, an Apex Forward Set Sear Actuator, Apex Fully Machined 2-Dot Sear and the Apex Forward Set Spring Kit which includes Duty/Carry Sear and Trigger Return Springs and Heavy Weight Sear and Trigger Return Springs.

Using a combination of the Apex springs and factory sear and trigger return springs allows the user to set the trigger pull weight within a range suitable for duty/carry down to a weight desired for competition.

Features and Specifications:

• For use in all sizes of the Smith & Wesson M&P M2.0 in 9mm/.40S&W/.45ACP
• Direct drop-in replacement of factory polymer hinged trigger
• Reduces overall trigger travel by approximately 40%
• Reduces trigger pull weight by up to 2 lbs. (approximately)
• Delivers crisp trigger break
• Smooths uptake and reset
• Reduces trigger over-travel
• Shortens reset length
• Center mounted pivoting safety maintains factory safety values

Products included:

• 1 ea. (11 total pieces in the package)
• Flat Faced Forward Set Trigger
• 2-Dot Sear
• Ultimate Striker Block Kit(Striker Block, Spring, and Talon Tactical Tool)
• Forward Set Spring Kit(Silver Trigger Return Spring, Green Trigger Return Spring,
  Polymer Slave Pin, Purple Sear Spring, Silver Sear Spring, and Sear Actuator)

What it does:

• Forward Set Trigger: Reduces Trigger Pre-Travel and Over Travel. Increases reach length to trigger face
  for shooters with longer fingers. Allows shooter to position finger lower on trigger face for increased
  leverage and therefore take advantage of lower trigger pull weights for competition.
• Patent Pending Sear Actuator: Shortens the stroke of the trigger pull by dropping the striker at a point
  farther forward than the factory component.
• Ultimate Striker Block Kit: Improved radius on the Striker Block Face produces a smoother trigger pull
  and eliminates most false reset issues.
• Forward Set Spring Kit: The full spring kit produces a 4lb to 5lb trigger pull.

Expected results:

• Trigger pull weight between the 4lb and 6lb mark (Dependent on trigger return spring and sear
  spring installed)
• Smooth uptake and reset
• Reduces Pre travel
• Reduces Over Travel
• Center mounted pivoting safety maintains factory safety values