BCM GUNFIGHTER Vertical Grip Short Mod 3 - KeyMod - Flat Dark Earth

Out of stock

BCM GUNFIGHTER Vertical Grip Short Mod 3 - KeyMod - Flat Dark Earth

$18.95

Direct Attach to KeyMod Version



  •     Low-profile length for increased mobility and decreased “snag” factor.

  •     The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.

  •     Can be mounted in reverse angle to increase control when grabbing handguard and grip.

  •     Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.

  •     Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.

  •     Made in the U.S.A., manufactured from high quality, impact resistant polymers.




Tools needed: T15 Torx Driver (not supplied)



  •     Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod™ Vertical Grip

  •     Push tool into the screw to extend the KeyMod™ anchor, making it protrude from the top.

  •     Align the anchors in the two selected large holes of the desired KeyMod™ slots. Grip can be installed in your desired orientation, angled forward or back.

  •     After the anchor is inserted, slide the BCM® Vertical Grip forward until it travels no further.

  •     Push the BCM Vertical Grip against rail, engaging the accessory’s recoil lugs to the intersecting KeyMod™ opening.

  •     With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).

  •     Ensure there is no wiggle or forward/backward movement once tight.



*Blue thread locker may be used on threaded fasteners

More Information
SKU BCM-VG-KM-MOD-3-FDE
Manufacturer Bravo Company MFG
Mount KeyMod