Dark mode is

rainierblog

  1. There are few parts of an AR that are as important as the bolt carrier group. While the standard Mil-Spec bolt carrier does its job well and has for decades, new improvements in technology and materials have come along and revolutionized the design. When looking at the Best Bolt Carrier Group to use for any AR-15, there a number of factors one must consider. Like many aftermarket pieces for ARs, much depends on what the intended purpose of the weapon is, what sort of budget you have to work with, firing frequency, and of course aesthetic appeal. However, before we delve into the finer points, lets first understand what a bolt carrier group is and what sorts of duties it performs.

    Continue reading

  2. Since the AR-15/M16 came out in 1957, it has become the one of the most popular firearms platforms in the world. During the last ten to fifteen years, many companies have been manufacturing aftermarket parts, such as stocks, trigger groups, bolt carriers, foregrips and muzzle devices. Even though the A2 flash hider has been around for a long time and is still very popular, many new designs have come out recently, each having their own benefits.

    Continue reading

  3. This weeks build is a slight departure from what we normally feature. Nearly all the firearms we have shown on these emails are various personal builds from employees here at Rainier Arms. The rifle we are showcasing today was built specifically for one of our local police departments here in Western Washington. The philosophy behind the build of this rifle was something to replace the department’s bolt guns for longer range shooting that also allowed SWAT sniper teams to participate in close quarters engagements if needed.

    Continue reading

  4. This week’s build is a bit different than ones we have shown off before. For a number of years Rainier Arms has been involved with the international sales of firearms and accessories to numerous countries around the globe. This rifle in particular was assembled for an international show, therefore the parts chosen were used to showcase some of the best products Rainier has to offer.

    Continue reading

  5. Check out our new build of the week breakdown! This rifle is a personal build, courtesy of one of our employees here at Rainier Arms. Each piece of this rifle has a unique purpose and reason for being there. Since this is one of our armorer's personal firearms, you can be sure that each part was considered carefully.

    Continue reading

  6. St Cloud, MN - Maxim Defense, the premier manufacturer in PDW-stocks, braces and accessories is announcing the release of significant new products at SHOT Show 2019. Maxim Defense is located in Booths #1857 - Downstairs and 30010 - Upstairs.

    Continue reading

  7. The LuthAR MBA – 3 is a very interesting stock, it is not a traditional stock that most would put on the traditional AR platform. When it comes to carbine buffer tubes, most people start looking at the traditional Magpul stocks, Mission First Tactical and many others. This is not an issue for a traditional AR, but as long-range precision is becoming more and more popular LuthAR stepped up to create a precision stock that can be fit onto a standard carbine buffer. This opens up the ability for those who do not like fixed stocks or cannot use a traditional fixed stock to use a precision stock.

    Continue reading

  8. What are the two most popular methods when applying for a SBR stamp? Trust Trust is a legal entity and as such can legally own assets. One of the most popular methods for getting a NFA stamp is using a trust for a couple reasons. Depending on the trust you select and it’s legal language the process of inheritance of NFA items can be considerably easier. A trust can provide the ability for the control to move to another person without actual ownership the of the item changing. Another benefit if you select a trust with the ability to add/remove co-trustees is you can allow other individuals to posses the same NFA items without you present.

    Continue reading

  9. The BAD-EMMR is a lightweight, low profile, modular magazine release for the AR-15 and AR-10, recently released by Battle Arms Development. Its expanded finger pad provides an enlarged, uninterrupted, contact surface that gives the user a positive tactile feedback resulting in fumble-free operation.  One of its outstanding features is its modular design, allowing its users to use an array of finger pads depending on personal preference or operation. The EMMR’s 3-sided, precision fit, solid, dovetail attachment interface simplifies its locking mechanism – a feature that makes it stand out from the rest of its competitors. This translates to a wiggle-free, tight tolerance, slop-free fitting between the magazine release body and finger pad. The dovetail attachment interface also removes the stress away from the screw; this allows a single, scaled down, set screw to be used as opposed to the typical two large steel screws.

    Continue reading

  10. Magpul continues to pump out brand new products. Last night they introduced two new products that look pretty awesome. First up is the new M-LOK Rail Covers Type-1. These rail covers install into M-LOK slots without any adapters or screws. Just snap in. The material is a very heat resistant and offers added grip surface on the rail. Each cover is 9.5″ in length and can cover 6 M-LOK slots and can be cut for different configurations. These come in a 2-pack for $16 at www.Magpul.com

    Continue reading

Items 11 to 20 of 21 total

Page