Hiperfire HIPERTOUCH Genesis, AR15/10 Trigger Assembly
The HIPERTOUCH 24 fire-control drop-in is a high performance, high precision, service rifle upgrade that installs in AR-15 and AR-10 type rifles. The HIPERTOUCH name is short for HIgh PERformance TOUCH and 24 for user adjustable trigger weights between 2 and 4 lbs. Its the AR? fire-control upgrade weve all dreamed of. For installation and operational features of the HIPERTOUCH family of AR fire-controls watch the 24 videos above. View this graphic, AR-15LowerCavity.PDF. HIPERTOUCH FCGs may not work in lowers with pivot holes that are outside the MIL-Spec dimensions shown in RED.
HIPERTOUCH FCGs have uniquely solved two problems with stock AR triggers and AR trigger upgrades respectively: 1) High Trigger Weight, and 2) Low Hammer Fall Energy.
Trigger Weight: The real culprit behind high trigger pull weight is high sear impingement force that produces high friction. To get around that, the stock AR? trigger and hammer mechanical advantage was changed and the toggle spring feature added to reduce the impingement force on the trigger sear. Designers of two-stage products changed the functional location of the primary sear; HIPERFIRE's design has not, retaining the stock designs single-stage simplicity. This is important for when stock triggers are pulled, the hammer cam-action signals hammer fall is imminent. When 2-stage triggers are pulled, the final higher weight stage also signals hammer fall. This can lead to the flinching problem we all know about. Some like to say the better 2-stage triggers have glass rod or candy-cane like breaks to sell the idea that they don't signal hammer fall. In any case, the HIPERTOUCH 24 does not signal hammer fall because the trigger weight is constant over the entire stroke.
Hammer Fall Energy: HIPERTOUCH features the unique toggle spring functionality that reduces trigger weight, but while doing so, it also increases hammer fall energy by over 35% over the MIL-spec stock design and every trigger upgrade in the market. This permits the shooter to ignite hard MIL and foreign primers as well as hard to ignite 22 rimfire ammunition.
HIPERTOUCH FCGs ratain Eugene Stoner's design of simple elegance while remaining very robust, without the gritty feel. Shooting for high accuracy is no longer an almost impossible chore. It's no longer necessary to improve the stock performance by manually polishing the high-friction trigger and hammer sear surfaces, where the end result was only marginally better anyway.
Ambitious sportsmen and marksmen have been turning to trigger upgrades with varying degrees of satisfaction. The better replacements have been one and two-stage triggers with fixed final weights ranging from between 21⁄2 and 41⁄2 pounds with what some have called a glass rod or candy cane trigger break. Some of these devices require factory or user calibration, maintenance, and/or replacement for wear or doubling. Some of these devices also employ reduced power springs, which have compromised reliable ignition for a "dream" trigger weight.
The HIPERFIRE "AR" accessory response to those shooters looking for a single-stage and very much improved, match quality, AR? trigger upgrade that delivers high performance is the HIPERTOUCH 24. It nests in unmodified standard AR-15 and AR-10 type lower receivers in the same way as stock AR? triggers and hammers without having to remove the safety selector. It is comprised of three subassemblies: the trigger, hammer, and toggle, spring groups. All the parts are made from carbon steel alloys that have been hardened for wear and strength. It features exceptionally low trigger weights with smooth pre-travel, a very clean hammer release with no report to break, match action response, and faster hammer lock-up. Only now with HIPERTOUCH trigger and hammer actions does "AR" trigger "squeeze" have real meaning.
Drop-In "AR10" and "AR15" Fire-Control High Performance, Service Rifle, Trigger Upgrade Match Quality Trigger Action and Hammer Fall Functions like the Stock, Semi-Auto "AR15" Fire-Control For Standard Lower Receivers Using Small Pins of 0.154-inch Diameter Uses Stock "AR" Trigger and Semiautomatic Disconnector Springs Uses Proprietary Trigger Hammer and Disconnector Parts Uses a Proprietary Toggle-Over-Center Spring System User-Set Trigger Weights Between 2 and 4 lbs. Smooth/Short Pre-Travel, Clean Hammer Release, Fast Reset 25% to 50% Faster Hammer Lock-Up Heat-Treated Alloy Steels Installs without Removal of the Safety Selector Installs without Modification to the Lower Receiver US Pat. No. 8,572,880, Others Pending Made Entirely in the USA by Americans