The Ultimate drop in trigger for your pistol, the E-CTG9 trigger can be configured for Carry (Self Defense) or Competition (Target) use and comes complete with their improved trigger spring kit so you can set the ultimate trigger pull on your handgun.

The trigger housing features our SSR (Super Short Reset) 3.5Lb Connector that delivers the same trigger profile as the factory unit but is highly polished and reshaped to reduce friction and create a much smoother, lighter more consistent pull.  This connector makes super fast reset of the trigger possible, allowing for very quick follow up shots and reduced friction means less resistance for smooth operation.

Their Trigger Bar is manufactured from a proprietary blend of 420 Stainless Steel and polished to produce an ultra smooth hard-wearing surface that reduces friction and trigger pull interference as it operates against the connector and internally against the pistol frame. 

The included spring kit comes with the following parts to assist in reducing trigger pull further.

• x1 4.0Lb Firing Pin Spring (For Target, Competition & Sporting Use)
• x1 4.5Lb Firing Pin Spring (For Tuning Trigger Pull)
• x1 60Lb Firing Pin Spring (For Carry & Self Defense Use)
• x1 6.0Lb Increased Power Trigger Spring
• x1 Reduced Power Firing Pin Safety Spring & Ultra Smooth Safety Plunger.

Springs are manufactured from the highest grade piano wire and tempered for the best service life.  Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired.  With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.  The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.

The Triggers Pivot Pin and Trigger Bar position has been carefully considered to deliver maximum leverage with minimum force and the hybrid bow face is a perfect blend of curved and flat surfacing that delivers comfort with improved ergonomics and finger positioning. The bow is precision machined from certified 7075-T6 aluminum and hard coat anodized Type3 Class2 Black.  Triggers are assembled in house and come with their lifetime warranty against defects in manufacture.

Weight .8 oz. 

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.