Product Unavailable
Unfortunately, the following product is currently unavailable through Rainier Arms.
MVB Industries AR-15 ARC-X v1 Multi Position PDW Stock w/ Buffer
Stock
Similar Products
This is a 5 – position collapsible stock for an AR-15 or pistol caliber rifle. Works with any existing Mil-Spec Bolt Carrier allowing use with both gas impingement and gas piston systems. Requires only one-handed operation and will lock in the closed, intermediate and extended positions. Supplied with Springs and buffer.
Specifications:
- Product Weight: 23oz
- Dimensions: 8.5 × 4.5 × 2.5 in
- Length Collapsed: 4 – 7/8″ (from lower receiver buffer extension)
- Length Extended: 8 – 7/8″
- Position increments: 5 x 1″
- Buffer Weights:
- H0 Carbine Buffer is 3.1 oz
- H1 Buffer is 3.9 oz
- H2 Buffer is 4.6 oz
- H3 Buffer is 5.3 oz
- PWS Buffer is 4.7 oz (specific to the PWS upper system. See below for more info)
- 9mm Buffer weight: 5.3 oz
- PCH Buffer weight: 8.5 oz (Recommended for use in .45 ACP Weapons. Not recommended for use in .45 ACP full auto weapons or weapons with a binary trigger systems.)
- PCH Auto Buffer weight: 8.3 oz (Recommended for use in .45 ACP full auto weapons and weapons with a binary trigger systems.)
Known Compatibility Issues:
- LaRue Tactical has a larger than mil-spec buffer extension in the lower receiver that interferes with the ARC Stock rails when attempting to collapse the stock.
- CMT Tactical UHP15 has a larger than mil-spec buffer extension in the lower receiver that interferes with the ARC Stock rails when attempting to collapse the stock.
- San Tan Tactical has built in quick disconnect sling attachment points just behind the takedown pin which block movement of the ARC Stock rails.
- LWRC ambidextrous lower has the right side bolt catch located in a position that prevents the ARC Stock from reaching its collapsed position. Modified version available at http://store.avguns.com/mvb-industries-arc-collapsable-pdw-stock/
- Spike’s Tactical ambidextrous billet lower has a right side bolt release lever that extends rearward far enough to prevent the ARC Stock from reaching its collapsed position.
- PWS MK1 MOD1 uppers (rifles and pistols produced from 01-01-13 to 12-31-15) were equipped with a carrier with added mass in the tail that requires the PWS specific smaller diameter buffer for the ARC Stocks.
- For all PWS MK1 MOD2 uppers and firearms, the carrier has the standard carrier tail bore dimensions and is compatible with their standard diameter buffers
SKU | MVB0501-V1-MP |
---|---|
Product Type | Stock |
Color | Black |
Platform | AR-15 |