McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Taking the AR15 parts and accessories to new heightsTM
Odin Works

Odin Works Lower Parts Kit

Odin Works Lower Parts Kit
Only 1 left

Availability: In stock




Complete Lower Parts Kit

  • 31 piece set to complete a lower.
  • Machined parts, no MIM.
  • Hammer 8620 Steel
  • Trigger 8620 Steel
  • Disconnector 4340 Steel
  • Trigger Pin 4140 Steel
  • Bolt Catch 4340 Steel
  • Polymer Pistol Grip

Additional Info

Additional Info

Manufacturer Odin Works
Finish No
Barrel Length No
Caliber No
Configuration No
Option No
Gas Length No
Height No
Rail Length No
Mount No
Profile No
Reticle No
Co Witness No
Size No


Customer Reviews (2)

UnusableReview by Disappointed 1st timer
My experience with this kit is similar to the one above. Most of the parts weren't usable.
- The hammer's j-pin wouldn't let the hammer pin through
- The grip screw was too long
- Safety selector wouldn't move once the detent was engaged
- The pivot pin was too long and wouldn't allow the upper to be attached

I'm very disappointed in this kit. In the end, it was basically useless with most of the parts needing to be substituted out. (Posted on 9/22/2016)
HORRIBLE KIT! AVOID!Review by Builder
Where do I start? This is one of the worst LPKs I've run across. NONE of the parts are even close to an actual quality LPK. Finish isn't normal either. It's a satin to shiny black finish like you see on some of those questionable imported junk parts you see at gun shows. Several of the parts were out of spec. The buffer retainer pin was FAR too long. The bolt catch was too thick so it wouldn't fit into a few of the lowers I tried. The hammer's j-pin is way out of spec. It wouldn't let the hammer pin go through because it was too far into the channel. The hammer and trigger pins has sharp 90 edges (they should be slightly least have the edges broken). The takedown pin had incorrectly sized detent holes so the detent wouldn't click in. That lead the the takedown pin being able to somewhat freely move since there was no retention.. The pivot pin was equally out of spec. The safety's detent holes were too deeply drilled so once installed, the safety couldn't be actuated at all. Seriously folks, I've had hundreds of parts kit come through my hands and not a single part in this kit looks like it's from any of the known US manufacturers/vendors (such as Schmid). I'd take a DPMS parts kit (which I think is JUNK!) over this kit and that's saying something! AVOID THIS KIT! (and avoid the Anderson kits too...different from this kit but also junk!) (Posted on 7/1/2016)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)

CMC Trigger Single Stage Flat

CMC Trigger Single Stage Flat

5 Review(s)
Upper Parts Kit

Upper Parts Kit

6 Review(s)
Rainier Arms XTC 2.0

Rainier Arms XTC 2.0

3 Review(s)