McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Taking the AR15 parts and accessories to new heightsTM
Polymer80

Polymer80 Spectre 80% Pistol Frame

Polymer80 Spectre 80% Pistol Frame

Availability: In stock

$149.99

Details

Details


This product is compatible with Glock17 Gen3 3-pin parts kit and upper receiver. 
Is this product legal in your state?  We urge you to research your state laws regarding the purchase & ownership of 80% Pistol Frames before buying this product.

Products Included in the "Spectre" Kit:

"Spectre" 80% Polymer Pistol Frame 1 each
Polymer Jig 1 each
Drill Bits & End-Mill Bits Kit 1 each
Locking Block 1 each

Additional Info

Additional Info

SKU P80-SpectreKit
Manufacturer Polymer80
Finish No
Barrel Length No
Caliber No
Configuration No
Option No
MOA No
Gas Length No
Height No
Rail Length No
Mount No
Profile No
Reticle No
Co Witness No
Size No

Reviews

Customer Reviews (30)

No commentReview by Michael
Quality
Value
Frame could use more rail support in the front. (Posted on 1/5/2017)
No commentReview by Richard
Quality
Value
- (Posted on 12/18/2016)
No commentReview by Joseph
Quality
Value
- (Posted on 12/17/2016)
No commentReview by Chase
Quality
Value
- (Posted on 9/27/2016)
Quality frame for DIY G17 / 22Review by Fred
Quality
Value
Spend a little time with this 80% frame, and you will be rewarded with a quality firearm. Take your time, and your efforts will be rewarded. (Posted on 9/23/2016)
No commentReview by Roger
Quality
Value
- (Posted on 8/9/2016)
No commentReview by Christian
Quality
Value
- (Posted on 8/9/2016)
No commentReview by Robert
Quality
Value
- (Posted on 8/6/2016)
No commentReview by Terence
Quality
Value
great cust. service, price, fast shipping. Have not yet put together, I'am
waiting for g17 slide before I start. Everything looks good. Thanks! (Posted on 8/5/2016)
No commentReview by Angel
Quality
Value
do you sell the complete 17 slides (Posted on 8/4/2016)
No commentReview by Joshua
Quality
Value
The frame is well put together, there's a million videos on youtube of how to complete it either with a drill press or with a dremel. I used a dremel, and it didn't turn out perfect, but I tested it out at the range, and it works. The grip itself is a little too big for my (small) hands, but I still like it. Someone online compared this grip to that of the M249 SAW, and I think that's pretty accurate. I prefer the small size and grip angle to my Lone Wolf Timberwolf frame, but for the price, you cannot beat the Polymer80. And you save even more money by not having to deal with an FFL. Comes with all the mill pieces and drill bits you'll need; and the locking block is made of steel and installs really easily. If you're even looking at this frame, then you're going to like it; buy it. (Posted on 8/1/2016)
No commentReview by Robert
Quality
Value
- (Posted on 7/31/2016)
Not for newbs and do you really need this?Review by CZPete
Quality
Value
OK, there are several issues with this kit.

1) You really need professional level machinery to execute it properly, a small hobby drill press will just not do. I suggest a minimum of a 13" drill press, or better, a full sized mill. Any cross vises will need a capacity of around 6" to handle the jig for at least one part of the job, if you go the drill press method. I suppose it could be done with hand tools, but it would be time consuming and not the best quality solution.

2) Even using proper procedures as provided by the manufacturer, there is the possibility that your parts will not interface properly. One such problem is usually the magazine release not engaging the magazine properly. That is fixed by modifying the magazine release to better engage the magazine in the proper area. The other main problem is in the sear/striker interface. This is a bit more problematic as changing the geometry can produce a dangerous condition or cause a low reliability problem (trigger won't go bang every time). Luckily, Polymer80 does provide tech support for their product, but that also required time and patience to diagnose and see if there are any solutions to your particular problem.

Unless you are well versed in the function of a Glock and it's components, I would not suggest this frame. An armorer level knowledge is required to assure proper fitment. Above all, be careful and do not follow many of the YouTube videos available, as the manufacturer also warns.

It all depends on how badly you need an unregistered pistol frame which you can never transfer to anyone. (Posted on 7/19/2016)
No commentReview by steven
Quality
Value
Never received merchandise and after multiple contact attempts in e-mail and phone, chose to dispute the charge with credit card company. (Posted on 7/13/2016)
No commentReview by Bryce
Quality
Value
Very easy, works great. Very happy. (Posted on 7/9/2016)
No commentReview by Darwin
Quality
Value
- (Posted on 7/8/2016)
No commentReview by Aaron
Quality
Value
two words to describe the polymer 80 frame. Friggin' awesome!
Also, as a former Spanaway resident, I am happy to find your Wa based business. (Posted on 7/3/2016)
No commentReview by jason
Quality
Value
- (Posted on 7/2/2016)
No commentReview by Elliot
Quality
Value
Have not started on it yet but I have seen them completed and it looks great when finished. Looking for special parts to start the build (Posted on 6/22/2016)
First Timer @ Building GunReview by Robert
Quality
Value
This was tricky for me as I did not have a mill, but did have a small bench drill press which I took my time at milling the frame to be extremely careful not to screw up. I have built a few ARs and work with hand tools on cars and so forth and couldn't wait to get my hands on this frame and a I was completely amazed that I was able to pull this off in little time. Most of it using a file and sand paper to clean up what I left from my minimal milling of the frame.

I was able to use my brothers Glock 22 gen 2 for some comparison and it came in handy as I used my mic to measure clearances as I didn't want to take off too much in the slide areas.

I installed a gen 3 slide from a doaner Glock 22 that I got off riverofguns.com for $300 to save a little dough and yesterday I was finally able to take it out and test shoot and loved every moment! I dropped in Lone Wolf 9mm conversion barrel and it did well, too.

I will say that this is easy to do for a novice and that being said I would buy another and highly recommend this to anyone that is looking to but together an inexpensive hand gun.

Not that tricky!!! (Posted on 6/20/2016)

Items 1 to 20 of 30 total

per page
Page:
  1. 1
  2. 2

Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)