Free CSS space: 66 kB of 75 kB
AMP is in Sandbox Mode.

Sig Sauer Romeo M17 Enclosed Reflex Red Dot Sight - Coyote

Sig Sauer Romeo M17 Enclosed Reflex Red Dot Sight - Coyote
$799.99
In stock
SKU SORM1700

Details

The M17 and M18 pistols have been selected by the US Military as the official sidearm, and the ROMEO-M17 is the only optic that is truly designed specifically for this pistol.  All other optics have many disadvantages and make several compromises.  The ROMEO-M17 does not.  This is an American-built MIL-SPEC red dot truly worthy of the SIG SAUER name.

*Please Note - The ROMEO-M17 pistol red dot sight utilizes SIG SAUER'S proprietary SIG-LOC mounting interface and only fits SIG SAUER M17/M18 military issue, and commemorative pistols with a single optics plate mounting screw. This sight will not fit any other pistols.

 

ROMEO-M17 FEATURES INCLUDE

  • A fully enclosed, sealed, and purged optical system, for ultimate protection from the elements
  • Mounts from underneath the pistol slide, re-using the MHS pistol rear sight block and sight block screw
  • 7075 Aluminum housing
  • Integrated gas deflector on the front of the housing
  • Machined anti-reflection grooves on all rear surfaces for reduced glare
  • Extremely low deck height, allowing a full sight picture and co-witness with standard-height sights
  • SIG-LOC™ (SIG Leverage Optimizing Connection) proprietary mounting interface, for the ultimate optic/pistol lockup.
  • A high-efficiency point source LED emitter, with 2 MOA dot/32 MOA circle reticle.  The reticles are independently selectable (circle only, dot only, or circle/dot combination).
  • Independent brightness adjustment buttons that are recessed within a protective plate which can be activated even with gloves on. Buttons have bump features above UP and below DOWN, so they can be determined by feel.
  • 15 brightness settings, with 3 of the settings optimized for use with Gen 3+ NV devices
  • A side-mounted CR2032 battery compartment with a threaded battery cap, for easy battery changes without the need to remove the optic from the firearm.  The cap is slotted and knurled, for use with or without tools.
  • Minimum continuous runtime of 20,000 hours, at medium brightness setting
  • 2 drainage holes machined in the sides of the housing, just behind the rear sealed window, to allow pooled liquid to escape when the optic goes from a vertical position (such as in a holster) to a horizontal position (such as shooting)
  • Windage and elevation adjustments have tactile clicks.  Adjustment screws are slotted, for use with any small flat-blade tool.  Adjustment resolution is 1.5 MOA per click.
  • MOTAC (Motion Activated Illumination)
  • MAGNETAC (Magnetic Activation)
  • D.A.R.C. (Dark Adaptive Reticles & Coatings)
  • Designed, developed, tested and fully assembled in the USA

 

Specifications:

  • RX Footprint: SIG-LOC (M17/M18 MHS & Commem.)
  • Color: Coyote Tan
  • Height: 1.1 in
  • Magnification: 1x
  • Objective Lens Diameter: 24 mm
  • Overall Length: 2.4 in
  • Overall Width: 0.9 in
  • Battery(1) CR2032
  • Reticle: 2 MOA Red Dot / 32 MOA Circle
  • Reticle Color: Red
  • Weight: 1.5 oz
  • Illumination Settings: 12 DAYLIGHT / 3 NV
  • Total Elevation Travel: 40 MOA
  • Total Windage Travel: 80 MOA

More Information

More Information
SKU SORM1700
Product Type Red Dot Sight
Manufacturer Sig Sauer
Color Coyote
Reticle Red Dot
Reticle Color Red
Magnification 1x
Optic Footprint SIG-LOC
Live Chat