Swampfox Ultimate Red Dot Screw Pack

Swampfox makes great dot sights for your pistol. You have a slide, adapter plate, dovetail mount, or custom gunsmith cut. Putting them together? Its gotten complicated. Swampfox has your back with the Red Dot Screw Pack, containing 15 four-screw sets of various thread pitches and lengths. When you run into mounting trouble, these small-head, T10 screws are the most likely to be the “problem solvers” needed to attach Kingslayer, Liberty, Justice, and Sentinel to those slides and mounts. Five sets of Do-It-Yourself screws (6-32, 4-40, 6-40, M3, M3.5, M4 pitches) deliberately feature a too-long-for-everything 14mm effective thread length. If all else fails, grab your Dremel or belt sander and trial-and-error cut them for a truly custom fit.

General Specifications:

• T10 Torx 
• Small heads: all heads 5.0 mm diameter except #6-32 specs (5.5 mm diameter) 
• Torque to no more than 15 inch-pounds
• Apply blue threadlocker to screw threads

EL: Effective Length from end of threads to screw head widest diameter

Fitment Guide

Kingslayer/Liberty/Justice:

• M3.5x0.6 | EL=11.0mm | Picatinny Mounts
• #4-40x0.250 | EL=6.35mm | Brownells Glock and Others
• #6-32x0.374 | EL=9.5mm | Glock MOS and Others

Sentinel-A/Sentinel-M:

• M4x0.7 | EL=10.1mm | Some Canik Elite SC
• M4x0.7 | EL=8.6mm | Springfield Hellcat
• M3x0.5 | EL=12.0mm | Sig P365XL

Ironsides Shield:

• #6-32x0.39 | EL=10.0mm | Glock MOS, Canik TP9, Others
• M4x0.7 | EL=14.0mm | Some Canik Elite SC
• M3x0.5 | EL=12.0mm | Picatinny Mounts

Do It Yourself (Extra Long):

• #6-32x0.551 | EL=14.0mm
• #4-40x0.551 | EL=14.0mm
• #6-40x0.551 | EL=14.0mm
• M3x0.5 | EL=14.0mm
• M3.5x0.6 | EL=14.0mm
• M4x0.7 | EL=14.0mm