DPM Systems Technologies Mechanical Recoil Reduction System - Walther Q5 Match

The DPM Mechanical Recoil Reduction System is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. As always, DPM products are designed and developed with user’s safety as a priority. Exceptional manufacturing and engineering using high-end materials.

This DPM System works with 6 different buffer recoil springs which each one offers different spring force (forces are listed at the end of the description). The System includes 3 external springs, 6 buffer recoil springs and 1 safety pin. The longer spring (more coils) is stronger and has a heavier pound rating than the shorter spring.

Overall Advantages:

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

Forces:

• Soft 0.7mm
  • Short = 8.0 kg/ 17 lbs
  • Medium = 9 kg/ 20 lbs
  • Long = 10 kg/ 22 lbs
• Hard 0.8mm
  • Short = 9.0 kg/ 20 lbs
  • Medium = 10.5 kg/ 23 lbs
  • Long = 11.5 kg/ 26 lbs

Please NOTE:

• For low power (very soft ammunition) its not essential to use any of the Buffer Springs.     
• In that case the System in full open position offers 7 kgs/ 15 lbs total force.